EUROLUB MR 350
PRODUCT INFORMATION:EUROLUB MR 350 is used as mold separator in plastic and rubber production. The appropriate working rate should be determined depending on the operating conditions and the characteristics of the surface to be applied. It can be diluted with water at a certain rate.
For your special or bulk orders, please contact us and get an offer.
Product Detail
USAGE AREA:Silicone Mold Separator
PRODUCT INFORMATION:EUROLUB MR 350 is used as mold separator in plastic and rubber production. The appropriate working rate should be determined depending on the operating conditions and the characteristics of the surface to be applied. It can be diluted with water at a certain rate.
ADVANTAGES :
-Can be mixed with water at any rate.
– Resistant to high working pressure and heat.
– Does not smoke.
By creating a perfect layer of protective and sliding film on the mould surface, the part is easily separated from the mold
provides.
– Prevents unpleasant coloration on mold and product due to protective and slider film layer.
– Mamul does not affect the structure and prevents surface defects. Mold does not make dirt on your face.
– Does not affect the process after processing. (Painting, coating etc.)
STORAGE:Silicone emulsion should not be kept in open containers,the lid of the canister must be kept closed. From cold and extreme heat
must be protected. The storage life in its original packaging and at room temperature is 6 months.
Additional information
| Weight | N/A |
|---|---|
| Package |
